AT-LA500 USB Logic Analyzer

Tech Specs

General features

Number of inputs:

36 in 4 banks of 9 channels with independent programmable thresholds (with Active probes).

Maximum sampling frequency:

500MS/s

GigaView

Minimun sampling frequency:

476S/s

Memory Depth:

1Million samples, 2MS or 4MS (x 36) 

Trigger Settings

Edge Condition:

No Edge, Rising Edge, Falling Edge, Both Edges for all channels.

Level Condition:

Condition verified if the selected inputs are equal (or different) to the pattern  that the user set. It is possible to disable the level condition making it ever verified.

Trigger Mode :

Edge AND Level; Edge OR Level; Edge THEN Level; Level THEN Edge; Trigger always, Never trigger.

Manual Trigger:

It is possible to force the trigger event during the acquisition.

Mode and sampling frequency

Timing Analysis:

500 MHz , divisible per power of two up to 2¹⁹

State Analysis:

It is possible sampling an external clock that comes from different combinations of dedicated inputs: it can be used up to 4 inputs of  the same bank or of different banks (using different thresholds)  and it’s possible to set edge condition (rising, falling or both) or level condition.     

Pretrigger:

The number of pre trigger samples is programmable from 1 to 100% of the memory depth.

Stop Acquisition:

It is possible to stop the acquisition and if the trigger event occurred, to read the acquired data.

Linking more instruments

Description:

It is possible to connect up to 8 logic analyzers to multiply the number of available channels (up to 288 channels).

Connect your oscilloscope to AT-LA500 to make a unique Mixed Signal Tester.

Number of linkable instruments

Up to 8

Probes

Available probes:

ASP Probe, Active Probe Hiz, Passive Probe

Interface

PC interface:

USB 2.0, also supports USB 1.1

Power supply

Input power supply voltage

12 V

Power

16W maximum

Dimensions and Weight

Dimensions (WxLxH)