 Probes
Active
Technologies offers a wide range of probing options
to support
different measurement needs.
Active
Hi-Z Probe: offers a linear input voltage range
from -40V to +40V with 1.1MΩ of input resistance.
ASP Probe : offers a linear input voltage
range
from -38V to +38V with <10pF of input capacitance
and 130 MHz of toggle rate.
Passive Probe: offers a linear input voltage
range
from 0V to 5V with 2V fixed threshold
4
Independent programmable thresholds allows you to test
circuits
with different logic families at the same time; 1 meter
length
probe cable provides an easy connection to boards under
test even
if they are far from the instrument
Active
Hi-Z Probe: |
Offers a linear input voltage range from
-40V to +40V with 1.1MΩ of input resistance.
|
Number
of inputs |
18
in two banks of 9. |
Input
capacitance |
9 pF |
Input
resistance |
1.1MΩ |
Maximum
toggle rate |
80MHz |
Linear
input voltage range |
-40
to +40 V |
Maximum
input voltage |
-60
to + 60 V |
Threshold
voltage |
2
programmable thresholds per probe, from -40V to +40V with
20mV step |
ASP Probe: |
Offers a linear input voltage range from
-38V to +38V with less than 10pF of input capacitance and
130 MHz of toggle rate.
|
Number
of inputs |
18
in two banks of 9. |
Input
capacitance |
< 10 pF |
Input
resistance |
22kΩ |
Maximum
toggle rate |
130MHz |
Linear
input voltage range |
-38
to +38 V |
Maximum
input voltage |
-38 to +38 V |
Threshold
voltage |
2
programmable thresholds per probe, from -38V to +38V with
20mV step |
Passive
Probe: |
Offers
a linear input voltage range from 0V to 5V with 2V fixed threshold
|
Number
of inputs |
18
in two banks of 9. |
Maximum
toggle rate |
100MHz |
Linear
input voltage range |
0
to +5 V |
Maximum
input voltage |
-3
to +6 V |
Threshold
voltage |
2
V |
AT-XSS:
|
 |
AT-LA500 provides a dedicated expansion bus, called AT-XSS, for expandability and synchronization with external instruments (i.e. oscilloscopes). The synchronization is bidirectional so that the oscilloscope and the logic analyzer can be in turn the trigger master.
The BNC board provides a simple way to connect your oscilloscope with AT-LA500. BNC cables are not included. |
 |
AT-XSS (Extended Synchronous System) Cable provides
a simple way to link up 8 AT-LAs to expand the number of channels
with no loss of performance: up to 288 Channels @ 500 MS/s.
It is also possible to connect other AT test equipment instruments
to create a measurement system. |
|
